|
Wireless monitoring probes developed by the InterMapper Community include:
Tranzeo CPQ Probe [.zip] [ view ]
Reports Antenna Type, Firmware, Connected AP MAC Address, Signal Strength, Noise, Connected SSID, and Total Bytes In/Out. It issues all warnings from the SNMP Traffic probe and alerts on Low Signal, High Signal, and Low Transfer rate.
Ubiquiti CPE Probe [.zip] [ view ]
Reports Antenna Type, Firmware, Device MAC Addresses, Connected AP MAC Address, Signal Strength, TX/RX Rate, Connected SSID, Total Bytes In/Out. It issues warnings for Low Signal, High Signal, and Low Transfer rate.
Redline AN-80 Probe [.zip]
Probes a Redline AN-80 point-to-point radio, acting as either a master or slave, to retrieve and display a number of critical statistics for the radio, and give alarms based on user-specified thresholds.
DragonWave AirPair Probe [.zip]
Monitors Serial Number, AP Type, Modem Sync LED, Rx Cable Loss, Tx Cable Loss, RSL, and BER. Tim also provides the MIB for the radio along with the probe.
Breezecom Wireless Devices [.zip]
Monitors Breezecom line of equipment from Alvarion.
|
![[ view ]](http://download.dartware.com/contrib/images/Tranzeo%20CPQ%20Probe.jpg){kind=link}
![[ view ]](http://download.dartware.com/contrib/images/Ubiquiti%20Probe.jpg){kind=link}