Switches Probes

Monitors the status of a particular BGP peering session on a Juniper or Cisco router, and generates alarms when the BGP session goes down.

Nortel Passport and Accelar Switches [.zip]

Monitors the CPU, Switch Fabric, and Buffer utilization of a Passport 8600 router.

Juniper EX-Series [.zip] [ view ]

Provides Informational, Tables, Resource Usage and Hardware Health information for Juniper EX-Series switches.

3Com 5500 switch [.zip]

Polls each interface of a 3Com 5500 switch, displays the current traffic in and out of each interface in kilobytes/second, and generates an alert if traffic on the monitored interface exceeds thresholds defined in the probe. This probe currently can only monitor one interface at a time.

Astrocom [.zip]

Polls each interface of an Astrocom device, displays the current traffic in and out of that interface in kilobytes/second, and generates an alert if traffic on the monitored interface exceeds thresholds defined in the probe. This probe currently can monitor up to three interfaces at a time.

High Traffic - PPS Probe [.zip]

Monitors traffic in packets per second, instead of bytes per second. This probe will provide a notification when traffic on a certain port/interface exceeds thresholds and give alarms when that interface goes down.

Tipping Point Intrusion Detection System (IPS) [.zip]

Monitors CPU, memory, critical log messages, and the number of passed/blocked packets for a TippingPoint IPS.

Juniper Netscreen SSG [.zip]

Monitors the CPU and Memory utilization of a Juniper Netscreen SSG security appliance using variables from NS-RES.

Nortel Ping Proxy [.zip]

Tells a Nortel device to ping the specified address, and returns whether the ping succeeded.

High Traffic Probe [.zip]

Gives a notification when traffic on a certain port/interface exceeds thresholds. Revised to give alarms if that interface goes down.